P0280

[HCAP0280] Accu-Cycle Elite Charger/Discharger/Cycler


This is the Hobbico AC/DC Accu-Cycle Elite Battery Cycler.
Charges, discharges and cycles NiCd, NiMH and Lithium-based battery packs.
Perfect for radio batteries, Lithium Park Flyer batteries,
plus single cell glow starter cells.

*** 2 Year Warranty ***

FEATURES: Charges and discharges 1-3 cell Lithium-Ion and Lithium Polymer packs
Peak charges, discharges and cycles 1-10 cell NiCd or NiMH packs
Charges two batteries at once
Auto Smart Set automatically calculates safety time-out, charge rate,
TRICKLE rate and discharge voltage cut-off based on battery type,
capacity, and voltage
Custom charging and discharging routines can be created for up to 10
packs and stored in memory
Prevents overcharging with peak detection for NiCd and NiMH packs and
CC/CV detection for Lithium-based packs
On-screen messages appear on large easy to see two line 16-character
LCD screen, messages feature less abbreviations, better
explanations and units of measurement with every number
AC/DC compatible for at home or on the field recharging
Optional Temperature Sensor (HCAP0281) functions w/ all battery types
Two Temperature Sensor ports
Two year warranty

INCLUDES: One Accu-Cycle Elite cycler
One AC adapter/power supply (NOT AVAILABLE SEPARATELY)
Two (red & black) alligator clips w/banana jacks
One instruction booklet
One Main/Memory menu sheet
One NiCd, NiMH, and Lithium menu sheet
One Charge/Discharge chart w/blank memory chart


REQUIRES: If needed, a 12V DC source, such as HCAP0800 & HCAP0200
If temperature sensor is needed, use HCAP0281

Connectors to go from the charger to the battery or radio:
HCAP0101....FUTABA J Tx/Rx LEADS ALL RADIOS EXCEPT 9VAP
HCAP0102....FUTABA J Tx/Rx LEADS 9VAP ONLY
HCAP0104....AIRTRONICS Tx/Rx LEADS
HCAP0105....JR Tx/Rx LEADS
HCAP0106....HITEC Tx/Rx LEADS
HCAP0108....CHARGE LEADS, BANANA PLUGS TO ALLIGATOR CLIPS
HCAP0110....Tx BATTERY WITH 9V CONNECTOR, FUTABA J Rx CHARGE LEAD
HCAP0310....BANANA PLUGS ONLY (3 PAIR)

SPECS: Input Voltage: 11-14.5V DC
AC Power Supply: 110V AC 60Hz input, 14.5V DC 2.5A output
Number of Output Ports: two
For BOTH Outputs:
Battery Types: Nickel-Cadmium (NiCd), Nickel-Metal Hydride (NiMH)
Lithium Polymer (LiPo), Lithium-Ion (Li-Ion)
Number Cells: 1-10 NiCd or NiMH (1.2-12.0V),
1-3 LiPo or Li-Ion (3.6-11.1V)
Fast Charge Current: * 50-2000mA
Fast Charge Termination:
NiCd/MH -"negative deltaV'" peak detection,
LiPo -"Constant-Current/Constant-Voltage" (4.20V/cell max.)
Li-Ion -"Constant-Current/Constant-Voltage" (4.l0V/cell max.)
Peak Detection Sensitivity: 3-15mV per cell adjustable
Fast Chg Safety Timer: * automatically calculated
TRICKLE Charge Current: * 0-200mA
Peak Detection Delay: 3 minutes
Discharge Current: 50-2000mA
Discharge Cutoff Voltage:
* 0.8-1.2V per cell adjustable for NiCd & NiMH
3.0V per cell fixed for Li-Ion and LiPo
Cycle Count: 1 to 5 (NiCd and NiMH only)
Cycle Delay- chg/dsch: 10 minutes
Status Indicators: two tri -color LEDs (red/amber/green)
Optional Temp. Cutoff: ** 60-130F (15-54C)
Output Connectors: banana jacks
Battery Memories: ten
Display Type: 2-line, 16 character LCD
Case Size: 3.7 x 6.1 x 1.2 in. (94 x 30.5 x 155mm)
Weight: 13.23 oz. (375g, not including Power Supply)
Length: 6.1" (155mm)
Width: 3.7" (94mm)
Height: 1.2" (30.5mm)

* Auto Smart Set Feature, can be manually overridden except
for fast charge safety timer
** Requires optional Temperature Sensor -HCAP0281

COMMENTS: To achieve Elite's maximum potential when using a DC input the
power source must be capable of delivering at least 5A of current
while maintaining 12V DC


Some key comparisons of the Accu-Cycle series;
Accu-Cycle Accu-Cycle Plus Accu-Cycle Elite

Input: 110V 60Hz AC 16V DC, 3A 11-14.5DC, w/110V 60Hz
switching AC supply
Batt/Chemistry
Types: NiCd, NiMH NiCd only NiCd, NiMH, LiPo, Li-Ion

Battery
Capacity Range: 350-1800mAh 250-2000mAh 50-5000mAh

Rx Fast Charge
Rates: 25, 50, 125mA 500 and 1000mA 50-2000mA calculated w/Auto
Smart Set
Tx Fast Charge
Rates: 50, 125mA 500 and 1000mA 50-2000mA calculated w/Auto
Smart Set
Tx Discharge
Rates: 250, 500mAh 250, 750mA 50-2000mA

Rx Discharge
Rates: 250, 500mAh 250, 750mA 50-2000mA

Price: $134.99
Buy Product Online | Visit Store Home
 
Manufactured by Hobbico


 Other Items from Chargers

  [DYN4051] 7.2 Volt 899Ma NiCD Wall Charger (Charges 1500Mah pack in 2 hours) - DYN4051
  [NOV4465] Ionic AC/DC Charger/Discharger - 
  [ONL10161] 5 Cell 6V 1100mAh NiMH Receiver Pack - ONL10161
  [DYN4044] Vision Peak 2 AC/DC Peak Charger - DYN4044
  [LOSB1206] Mini Peak AC Wall Charger: Mini-T - LOSB1206
  [ASCLRP4155] Pulsar Competition Charger - ASCLRP4155
  [DYN4036] Prophet Plus AC/DC Peak Charger - DYN4036*
  [INTE2023] INDI 16X5V6 Charger W/AC, DC PS - INTE2023
  [CEI3760] Turbo 35 GFX Charger - CEI3760
  [LOSB1204] Tamiya Charger Adapter: Mini-T - LOSB1204
  [EFLC3000] Celectra 1-2Cell LiPo DC Charger - EFLC3000

 

  Return To Hobby Store/ The Rc Shack/ Monster Trucks/ RC Cars/ Xray Xt8/ Xray XB808/ Radio Control

 

 

shopping cart
Shopping cart powered by MonsterCommerce ecommerce solutions.